3M™ Static Shielding Bag Open Top 3×5, Perfect for SSDs

Description

3M™ Static Shielding Bag 1000
This transparent metal-in static shielding bag is designed to provide a static safe
environment for sensitive electronic devices. Bags are printed with an ESD warning
symbol and a lot code for traceability. Open top and ZipTop styles are available. The
bags are heat sealable.
3M Static Shielding Bags 1000 are manufactured from a polyester, metal,
polyethylene laminate. The polyester dielectric in concert with the metal layer is
intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize
the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of Static Shielding Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program
compliant.
Physical
Typical
Value Testing
Method
Tensile
Strength
4600 PSI, 32 MPa
ASTM D882
Puncture
Resistance
12 lbs, 53 N
MIL-STD-3010C Method 2065
Seal
Strength
11 lbs, 48 N
ASTM D882
Thickness
2.8 mils, .071 mm +/-15%
MIL-STD-3010C Method 1003
Marking
Adhesion Pass
IPC-TM-650 2.4.1
Transparency
40%
Tobias
Electrical
Typical Value
Testing Method
ESD
Shielding
<10 nJ
ANSI/ESD STM11.31
Surface
Resistance –Interior
<1x10
11
ohms
ANSI/ESD STM11.11
Surface
Resistance –Exterior
<1x10
11
ohms
ANSI/ESD STM11.11
Static
Decay
< 2 seconds
ETS 406D
Cleanliness
Typical Value
Testing Method
Silicone
Not Detected
FTIR
Heat Sealing Conditions
Typical Value
Temperature
300ºF – 375°F, 149ºC – 190°C
Time
0.5 – 3.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa